Panasonic KW9M User Manual page 49

Voltage THD alarm threshold (OUT1 OUT2)
Set a value of voltage THD to use for alarm output.
Voltage THD alarm OFF threshold (OUT1 OUT2)
Set a value of voltage THD to clear the alarm output.
Current THD alarm threshold (OUT1 OUT2)
Set a value of current THD to use for alarm output.
Current THD alarm OFF threshold (OUT1 OUT2)
Set a value of current THD to clear the alarm output.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
* It is only when [AL-VT] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 400.00 [%] (initial: 400.00)
Increase
decrease
* It is only when [AL-VT] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 400.00 [%] (initial: 400.00)
Increase
decrease
* It is only when [AL-CT] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 400.00 [%] (initial: 400.00)
Increase
decrease
* It is only when [AL-CT] is selected for unit for pulse output.
Press <ITEM/△>, <SHIFT/▽> to set.
[Set range] 0.00 to 400.00 [%] (initial: 400.00)
Increase
decrease
42