OKIDATA Microline 395 Service Handbook page 69

%3.2.27 Bail Open Cam and Bail Open Gear
3.2.27 Bail Open Cam and Bail Open Gear
1. Remove the printer mechanism (3.2.08).
2. Detach the E snap ring (1).
3. Remove the bail open gear (2).
4. Remove the bail open cam (3).
5. Remove the plastic ring (4).
Caution:
Installation
When installing, make sure that the plastic ring is positioned against the rim on the bail open cam.
Installation may be easier if the bail open cam is installed on the shaft first, followed by the bail open
gear.
Press down on the spring (5) slightly when installing the cam and ring.
The plastic ring MUST rest against the spring.
P/N 50911001 Brake Spring - B (Color) B.2.11
P/N 51214601 Gear: Bail Open (Color) RSPL B.2.11
P/N 51222601 Cam: Bail Open (Color) RSPL B.2.11
ML395 ( 96-02-03 )