Kit Accessories - Midtronics Celltron Ultra Instruction Manual

Chapter 1: Introduction

Kit accessories

Item
DuraClamps
DuraProbes
Probe-extender kit
Digital infrared temperature sensor Measures jar temperature in Celsius or Fahrenheit
SD memory card reader
Midtronics printer with an AC
adapter (120 Vac, 60 Hz)
Infrared IR receiver and CD with
PC software
AC adapter, 120 Vac, 60 Hz
(Optional adapter: 110 to 240 Vac,
50/60 Hz)
Spare NiMH battery pack
Spare extender lamps
For technical assistance and to purchase replacement parts, call Midtronics Customer Service. (See
"Patents, Limited Warranty, Service.")
Description
Cables with 127 mm (5 in) clamps and 50.8 mm (2 in)
openings for large jar posts
Cables with 152.4 mm (6 in) probes with rotating heads and
27.7 mm (0.5 in) tips for quick contact with large jar posts
Lighted probes for increasing visibility in confi ned jar racks
and cabinets
Transfers test data to a PC through a USB port
Handheld printer with infrared receiver for data transmitted
by the Celltron ULTRA; includes battery charger (output
10.2 Vdc, 800 mA) for charging the printer's NiMH batteries
IR receiver that attaches to a PC serial port and software that
enables you to view and save test data on a PC
Charger for the analyzer's internal NiMH battery pack (output
12 Vdc, 100 mA)
9.6 V, 1800 mAh
Lamps are replaceable: peel them off; use alcohol wipes to
clean the surface, and attach the new lamps
10
• •
Celltron ULTRA