About This Guide; Finding Specific Information In This Guide - 3Com CoreBuilder 7000 Installation & Start?Up Manual

Finding Specific
Information in
This Guide
A T
BOUT HIS
®
The CoreBuilder
7000 Family ATM Switches Installation and Startup
Guide provides all the information you need for installing and powering
up the CoreBuilder 7000 family ATM switch in ATM networking
environments. It is applicable for both the Base and Extended versions of
the software.
This guide is intended for the system administrator, network equipment
technician, or network manager who is responsible for installing and
managing network hardware such as the CoreBuilder 7000 family ATM
switch. It assumes a working knowledge of network operations and
familiarity with communications protocols that are used in networks. No
prior knowledge of 3Com's CoreBuilder 7000 networking equipment is
necessary to understand this manual.
If the information in the release notes that are shipped with this product
differs from the information in this guide, follow the instructions in the
release notes.
This table shows the location of specific information in this guide:
Table 1 Information in this Guide
If you are looking for
An overview of the CoreBuilder 7000 family ATM switch and
components
Instructions for unpacking the CoreBuilder 7000 family ATM
switch
Information about installing your CoreBuilder 7000 family ATM
switch
How to install and hot swap modules and cards and connect
cables
The system power-up procedure and initial system checks
G
UIDE
Turn to
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5