Documentation; Corebuilder 7000 Family Atm Switch Documents - 3Com CoreBuilder 7000 Installation & Start?Up Manual

Documentation

CoreBuilder 7000
Family ATM Switch
Documents
Table 3 Text Conventions (continued)
Convention Description
The word "command" means that you must enter the
Commands
command exactly as shown and then press Return or Enter.
Commands appear in bold. Example:
The words "enter" When you see the word "enter" in this guide, you must type
and "type" something, and then press Return or Enter. Do not press
Return or Enter when an instruction simply says "type."
Keyboard key names If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+). Example:
Words in italics Italics are used to:
This section provides information about supporting documentation,
including:

CoreBuilder 7000 Family ATM Switch Documents

Related Documents
Documentation Road Map
The CD-ROM that comes with your system contains on-line versions of
the documents:
CoreBuilder 7000 Family ATM Switches Installation and Startup
Guide
This guide describes how to install and setup a CoreBuilder 7000
family ATM switch.
To remove the IP address, enter the following command:
SETDefault !0 -IP NETaddr = 0.0.0.0
Press Ctrl+Alt+Del
Emphasize a point.
Denote a new term at the place where it is defined in the
text.
Identify menu names, menu commands, and software
button names. Examples:
From the Help menu, select Contents .
Click OK .
Documentation 11