Downloading The Configuration Of A Card - 3Com CoreBuilder 7000 Installation & Start?Up Manual

6
3
4
5 Server IP address: 100.0.0.111
6
7 Start upload to 100.0.0.111, file name
Downloading the
Configuration of a
Card
1 Perform the LMA menu command:
2 The LMA automatically presents you with a list of the installed cards
For loading a single item you can enter a full file name.
Start upload to 100.0.0.111, file name
switch/cfg/box_prof.cfg, Box Profile (Y/N)? y
Load process started..
Loading the "Other" Data Type
The "Other" item allows you to specify a file type by code number. This
option is relevant to configuration data items in the CoreBuilder 7X00
cards and are specified in the Release Notes for those products; the
configuration data item and its number (0–9999) are specified there.
If you want to upload the "Other" data type, proceed as follows from
step 3:
Select File type: 9
Insert file type (0-9999): 1001
Name of file to be uploaded: switch/cfg/unknown.cfg
switch/cfg/unknown.cfg, 1001 (Y/N)? y
Load process started...
To retrieve (download) the configuration of a card installed in the
CoreBuilder chassis from disk to flash memory, first make sure that the
switch is connected to the TFTP server and then perform the following
steps:
(1) SYS\ (3) LOA \(7) TCD
whose configuration you can download from disk, for example:
Module Types:
1<Switch module 7000>
2<Slot 3 - 7600>
3<Slot 4 - 7600>
4<Slot 5 - 7400>
5<Slot 6 - 7200>
Select Module: 1
Storing and Retrieving Configuration Parameters
.
79