Auto Off Mode; Tamp Set; Pre-Infusion; Programming Custom Settings - Sage The Oracle BES980 Quick Manual

OPERATING YOUR NEW APPLIANCE

AUTO OFF MODE

The machine automatically switches
to AUTO OFF mode after 30 minutes.

TAMP SET

Adjusting tamp parameters allows for fine tuning
of coffee tamping force and polishing duration.
While 'TAMP SET' is displayed on the LCD, press
the SELECT dial. The tamp force setting will flash.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE

PRE-INFUSION

Low pressure pre-infusion allows you to control
the pressure and duration of the pre-infusion
phase of the espresso extraction. While 'PRE
INFUSE' is displayed on the LCD, press the
SELECT dial. The pump power setting will flash.
Turn SELECT dial to increase or decrease the
pre-infusion pressure. Press SELECT dial to set
and pre-infusion duration will flash. Turn SELECT
dial to adjust seconds.
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
LONG BLACK ADJUST -

PROGRAMMING CUSTOM SETTINGS

There are 6 custom Long Black settings for you
to program to suit your cup size and strength
preferences. To program your custom setting:
1. Fill the portafilter using the auto grind, dose
& tamp function.
2. Insert the portafilter into the group head.
3. Position your cup so the portafilter spouts and
hot water outlet are directed inside the cup.
4. Press the MENU button. Rotate the SELECT
dial to 'LONG BLACK ADJUST' then press
SELECT SELECT SELECT the SELECT dial.
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
EN
SELECT SELECT SELECT
TEMP TEXTURE TEMP TEXTURE TEMP TEXTURE
13