Programming The Transmitter - Siemens FUS1010 Operating Instructions Manual

5.4

Programming the Transmitter

Select Language and Units
Note
Before creating a site select a Language and then English or Metric units from the [Meter
Facilities] menu.
Note
To select English or metric units: In [Meter Type] menu, scroll to [Meter Facilities] menu.
Press <Right Arrow> and select [Preferred Units]. Press <ENTER> to select. Press <Left
Arrow> and <Up Arrow> to return to main menu.
Select a Meter Type
1. Press the <MENU> key and select the Meter Type.
2. Press the <Right Arrow> and scroll to [2 Channel Flow]
3. Press <ENTER> to select. Press <Right Arrow> to select a different meter function, if
FUS1010 IP65 NEMA 4X & IP66 NEMA 7
Operating Instructions, 01/2013, A5E02951520-AC
Note
Select [2 Channel Flow] if measuring two different pipes and [Dual Path Flow] if sensors
are mounted on the same pipe.
desired then press <ENTER>.
①
Select for summing or subtracting flow from two different pipes.
②
Select for measuring two different pipes. (Not available for all models.)
③
Select if two sensors are mounted on the same pipe.
Connecting
5.4 Programming the Transmitter
49