Siemens FUS1010 Operating Instructions Manual page 211

Appendix
A.3 RS-232 Connection
Navigating through the Installation Menu
After accessing the Installation Menu, you can begin to setup your flow meter according to
the instructions in this manual. The chart below shows the PC keyboard equivalents to the
keypad keys while you are in the menu.
SITRANS F 1010 Keypad
<Up Arrow>
<Down Arrow>
<Right Arrow>
<Left Arrow>
<MENU>
<DATALOG>
<CLR>
<ALT+Up Arrow>
<+/-> (chg sign)
<ENTER>
Digits
/
X
+
-
=
.
Terminal Mode Menu Commands
In addition to Menu, the following commands (followed by the <Enter> key) can be used to
control the flow meter while in Terminal Mode.
Note
The "n" refers to the flow meter Channel number. For a 2-Channel Arithmetic site (Ch1 +
Ch2 or Ch1 – Ch2) the virtual Channel is number 3.
Logger
Invokes the download of all data stored in the Datalogger. Note that the Datalogger data is
not erased from the flow meter memory when it is downloaded. It is recommended to capture
this information into a file with a "csv" extension, which can be easily imported into MS Excel.
210
PC Keyboard
<Up Arrow>
<Down Arrow>
<Right Arrow>
<Left Arrow>
^L (Ctrl L)
^D (Ctrl D)
<Backspace> or <DEL>
^U (Ctrl U)
| (bar, shift + backslash)
<Carriage Return>
Digits
/
* (upper case 8)
+
-
=
.
Description
Move up 1 menu cell (or Flow Display
screen)
Move down 1 menu cell (or Flow Display
screen)
Move right 1 menu cell (or Flow Display
screen)
Move left 1 menu cell (or Flow Display
screen)
Toggle between Menu and Flow Display
Generate Datalogger report
Deselect list selection
Logger Display Page Advance
Change numeric sign. Can also type (-)
key
Enter Key
Numerals zero through 9
Divide by
Multiply by
Plus
Minus
Equals
Decimal Point
FUS1010 IP65 NEMA 4X & IP66 NEMA 7
Operating Instructions, 01/2013, A5E02951520-AC