Figure 5-11 Hi Precision Sensor Label - Siemens FUS1010 Operating Instructions Manual

①
②
Figure 5-11
Sensor Selection
The following is a typical sensor selection procedure.
Note
The transmitter must be powered up before you can select a sensor model. Refer to
Transmitter Wiring (Page 39).
1. Press <Left Arrow> to return to main menu. At [Meter Type], press the <Right Arrow> and
2. The [Channel Setup] menu will appear.
3. Press the <Down Arrow> to select [install Sensor].
4. Press the <Right Arrow> to [Sensor Model]. Press <Right Arrow> and scroll to select the
FUS1010 IP65 NEMA 4X & IP66 NEMA 7
Operating Instructions, 01/2013, A5E02951520-AC
Hi Precision sensor model number
Sensor size
Hi Precision Sensor Label
then <ENTER>.
sensor model number on the sensor label.
Connecting
5.5 Sensor Installation
59