Q12 : How To Set Hart Device Address By Hrt-710 Utility - ICP DAS USA HRT-710 User Manual

(2) Users can use the Modbus Function Code 4 and address from 0 to 2 to get the
HART command No.149 data.
(Ex: Request Cmd => 0x01 0x04 0x00 0x00 0x00 0x03)

Q12 : How to set HART device address by HRT-710 utility ?

A12: (2014/03/05)
Add the ―UserCMD(6)‖ to HRT-710 :
1.
(1) Run ―HG_Tool‖ and connect to HRT-710.
(2) Open the ‖Device Configuration‖ page.
(3) Add ―UserCMD(6)‖ and choose ―Manual‖ option in ―Mode‖ field. (Figure 12-1)
(4) Click ‖Save to Device‖ button. (Figure 12-2)
HRT-710 User Manual (Version 1.24, June/2015)
Figure 11-4 The Modbus address for UserCMD
Figure 12-1 Add UserCMD(6)
PAGE: 93