Table of Contents
Advertisement
Figure 3-9 Add ―User CMD(3)‖ to HRT-710
[2] The below MB/RTU client will use the ―Modbus Poll‖ tool to show the CMD(3) data
of HART device by polling Modbus address 0 ~ 9.
<1> Confirm the connection between HG_Tool and HRT-710 is disconnected.
<2> Set the ―Modbus‖ parameters like Figure 3-10.
HRT-710 User Manual (Version 1.24, June/2015)
PAGE: 75
Advertisement
Table of Contents
