ICP DAS USA HRT-710 User Manual page 74

<5> The CMD(3) data of HART device is shown like Figure 3-8.
[ 4.2 - The firmware version of HRT-710 is older than v1.5 ]
[1] Add ―User CMD(3)‖ with ―Simple‖ format and then click ―Save to Device‖ to save
the new HART device setting to HRT-710 like Figure 3-9. The mapped Modbus start
address and length of User CMD(3) data can be found in ―Cmd In address‖ and ―Cmd In
size‖ field. In the example, they are 0 and 20.
HRT-710 User Manual (Version 1.24, June/2015)
Figure 3-7 Com Port Parameters of ―Modbus Poll‖ tool
Figure 3-8 The CMD(3) data of HART device
PAGE: 74