Task Operation On Trip - Omron 3G3MX2 Series User Manual

3 Operation Procedure for Drive Programming
3-3-6

Task Operation on Trip

Basically, even if the inverter detects a trip during the Drive Programming operation, the operation is
continued. However, if any of E43 to E45 trips related to the Drive Programming is detected, the opera-
tion is stopped.
Or, with the "on trip goto" command, the program can jump to other process after a trip occurred.
With/without
"on trip goto"
Without
With
For details on the trips E43 to E59, refer to Section 8 Errors and Remedies.
3 - 18
User trip
E50 to E59
Operation is continued.
After the "on trip goto"
command is executed, the
program jumps to the
specified label and the
operation is continued.
Error status
Drive Programming
related trip E43 to E45
Program is stopped.
Program is stopped.
Drive Programming User's Manual (I580-E2)
Other trips
Operation is continued.
After the "on trip goto"
command is executed, the
program jumps to the
specified label and the
operation is continued.