Omron 3G3MX2 Series User Manual page 55

4 Drive Programming Editor
Command
Vertical Align Bottom
Orientation
Auto-arrange
Show Contacts
Show
*1. A unit of display on the flowchart is called "Block". A block consists of a command, or a command and a label
attached to the command.
 Commands for the text program
Command
Find
Replace
Increment Indentation
Decrement Indentation
Format selected text
Comment selected text
Uncomment selected text
 Program conversion
You can convert a flowchart program to a text program, and vice versa.
When a conversion is performed, the program is once compiled. Note that if a compilation error
occurs, the conversion will not be completed.
Also, comments, alias definition, region definition, etc. are deleted when a compilation is performed
for conversion. The operation does not change, however, the forms and contents of the program are
partially changed.
Command
Convert Text to Flowchart
Convert whole program to
Flowchart
4 - 8
Icon
Aligns vertically the bottoms of the currently selected blocks
Selects an orientation for connecting the blocks
Arranges the blocks
rently selected orientation.
Switches display/hide of the contacts of the blocks
Enables to select a display style of the program from options
below.
• Text only
• Icon only
• Icon and text
• Name, icon and arguments
Icon
Looks for a text in the Drive Programming Editor.
Replaces a text in the Drive Programming Editor.
Increases the indentation of the selected text.
Decreases the indentation of the selected text.
Formats automatically the selected text.
Transforms the selected lines of text to comments.
Uncomments the selected lines of text.
Icon
Converts current text task/subroutine to flowchart.
Converts whole program to flowchart.
Description
*1
*1
of the flowchart automatically in the cur-
Description
Description
Drive Programming User's Manual (I580-E2)
*1
.
.
*1
.