Omron 3G3MX2 Series User Manual page 58

If you right-click on a flowchart block, a popup menu with more options will appear.
The following table shows the menu commands available in the flowchart program.
Command
[Bring To Front]
[Send To Back]
[Pin]
[Lock]
[Cut]
[Copy]
[Paste]
[Set Label]
[Set Subroutine]
Drive Programming User's Manual (I580-E2)
Places the selected block graphically in front of other blocks.
Places the selected block graphically in back of other blocks.
Fixes the selected block to its current position in the graph. It will not be moved in
drag operations.
Acts like [Pin] and, besides, sets the properties of the block as read-only.
Deletes the selected block and saves it in the clipboard, for further pasting.
Saves the selected block in the clipboard, for further pasting.
Puts the contents previously copied in the clipboard into the design area. Note that
you can also paste them as images in other applications.
Sets the label name for the selected block.
Sets the subroutine name for the selected block. This menu command is available
only for blocks for which you can set subroutines.
4 Drive Programming Editor
Description
4
4 - 11