Table of Contents
Advertisement
Holsten1AE_Basic_FM.book Page 15 Monday, November 6, 2000 8:10 PM
Immediate Transmission
Immediate Transmission is conven-
ient when:
• You wish to quickly check whether
you have successfully connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the {Start} key. The mes-
sage is scanned and transmitted page
by page without being stored in
memory.
A
Make sure that the machine is in
standby mode.
The display should look like this:
READY
SET DOC. OR DIAL NO.
Note
❒ The memory indicator should
go out. If the memory indicator
is lit, press the {Memory} key.
B
Place the entire document face
down into the Automatic Docu-
ment Feeder.
TRANSMIT
DIAL FAX NUMBER
Note
❒ No more than 30 pages (80g/
2
m
).
❒ You can dial before you set the
document. Place the document
after you dial the number and
go to step D.
Memory Transmission and Immediate Transmission
C
D
100% 10:00
Canceling an Immediate
Transmission
Before start is pressed
A
OPTIONi
While dialing or during transmission
A
Dial.
TRANSMIT
Y/START
5551234kkkkkkkkkkkkk
Note
❒ If you install an external tele-
phone, you can send the mes-
sage manually. Pick up the
external telephone handset and
dial.
Press the { { { { Start} } } } key.
5551234
DIALING
The machine dials and connects to
the other party. The number that
you dialed and the other party's
OWN NAME or FAX NUMBER is
displayed.
Press the { { { { Stop} } } } key, or remove
the document you have set.
Press the { { { { Stop} } } } key.
However, the fax message which
has already scanned in has trans-
mitted.
Remove the document after it is
canceled.
2
15
Advertisement
Table of Contents
