Ricoh FAX1400L Operating Instructions Manual page 52

Holsten1AE_Basic_FM.book Page 46 Monday, November 6, 2000 8:10 PM
Troubleshooting
Problem
TRANSMISSION
The original is not pulled into
the Automatic Document Feed-
er.
4
46
Required Action
In case panel display is not changed to "
", you did not feed the document far enough into
NUMBER
the Automatic Document Feeder.
Insert the document into the Automatic Document Feeder
until it stops.
Retransmit.
Do user maintenance, especially rollers(1). See Chapter 9,
"Cleaning the Rollers and Scanner" in the Advanced Fea-
tures manual.
The telephone line is disconnected.
Check that the line is connected properly.
The telephone line type setting is incorrect.
Check the telephone line type setting. See Chapter 7, "Set-
ting the Phone Line Type (Function 62)" in the Advanced
Features manual.
If your machine is connected to your PBX, the dialed
number does not contain an PSTN access code or a pause.
Include the PSTN access number and a pause before the tel-
ephone number.
Check the Access Number setting, See Chapter 7, "Setting
the Access Number (Function 61)" in the Advanced Features
manual.
If your machine is connected to your PBX, the dialed
number did not have enough pauses between the access
PSTN number and the telephone number.
Try adding more pauses after the access PSTN code.
The Country Code setting is incorrect.
Check the Country Code setting. See Chapter 7, "Setting the
Country Code (Function 61)" in the Advanced Features
manual.
Note
❒ This Function is not available in some areas.
DIAL FAX