Enab Le The «Blade Closed» Standby Mode; Automatic Standby; Shutting Down The Device; Automatic Device Shutown - infaco Electrocoup F3015 Original Instructions Manual

Enable the Stand-by Mode
The device has a standby mode making it possible to quickly and safely store your pruning shears in
its sheath.
2. Press the half-open switch twice without releasing the trigger.
3. When the 3 charge indicators flash, the device standby mode
is enabled.
4. You can release the trigger, the device is in «blade closed»
standby mode.
x2

Automatic standby

For your safety, the tool is fitted with an additional safety mechanism that automatically switches the
pruning shears to standby mode if they are not used for 3 minutes (LED power supply flashes green).
To reactivate the pruning shear, press the trigger twice to start it up again.

Shutting down the device

To turn off your pruning shears, press the ON/OFF button for 1 second
Automatic device shutdown
The pruning shears will power OFF automatically if they are not used for 15 minutes.
1. Press and hold the pruning shear trigger to keep the blade shut
5. In standby mode, the power supply LED flashes green. To re-
activate your device, press the trigger twice.
1s
x2
9