Contents SAFETY INSTRUCTIONS ______________________________________________ 5 PERSONAL PROTECTIVE EQUIPMENT __________________________________ 5 ENVIRONMENTAL PROTECTION ______________________________________ 5 GENERAL VIEW PRODUCT____________________________________________ 6 CHARACTERISTICS __________________________________________________ 6 VIEWS COMPATIBLE ACCESSORIES « PW2 » ___________________________ 7 USUER MANUAL ____________________________________________________ 8 _______________________________________________________ Using for the first time _______________________________________________________ Mounting the handle ______________________________________________ Installation and connection...
Page 4
Reference Description Universal handle for the range POWERCOUP PW2. THD600 Double hedge trimmer, length of the cutting bar 600 mm (23,5’’). THD700 Single hedge trimmer, length of the cutting bar 700 mm (27,5’’). THS700 Single hedge trimmer, length of the cutting barr 700 mm (27,5’’).
Follow the specific instructions for waste elimination in your country. Electrical appliances should not be thrown in the garbage. The device, accessories and packaging should be recycled. Ask your specialist INFACO retailer for the latest information on eco-compatible waste elimination..
GENERAL OVERVIEW Motorized handle User’s manual for PW2 Retractable handle T20 Screwdriver Torx Spray lubricant Power trigger Safety trigger Bumper Clamping lever Lock ON/OFF button LED light Tethering ring Power port Vent grill Clamping screw handle Removable handle CHARACTERISTICS Reference Voltage 48VCC Power...
INSTALLATION AND CONNECTION Only use INFACO brand batteries with a supply voltage 48 volts. Use of any battery other than INFACO batteries can cause damage. No warranty will be granted on the motorized handle when using batteries other than those manufactured by INFACO.
Page 10
1 Start: : 1 short press of the trigger = ON 2 short presses of the trigger = ON 1 short press of the trigger = OFF Standby output: 2 short presses of the trigger = ON...
LIGHT DISPLAY / LED Situation Display Descriptions Battery level 48VCC Battery level between 100% and 80%. Battery level 1,480 Kg Battery level between 80% and 50%. Battery level Battery level between 50% and 20%. Battery level Battery level between 20% and 0%. 2 cycles for power and then displays Sequence when plugged in standby mode.
SAFETY PRECAUTIONS The tool is fitted with an electronic protection system. As soon as the appliance becomes blocked due to meeting strong resistance, the electronic system causes the motor to stop. Restart the machine by carrying out operation « l » in “Using the tool”...
CARE AND MAINTENANCE All maintenance operations or maintenance must be performed after disconnecting the tool from all power sources. Maintenance of the tool depends on frequency of use. Occasional use, space out intervals. Intensive use, more frequent intervals. Visual inspection Complete tool Cleaning Have check by dealer...
SETTING CLEARANCE Unplug the tool. Do not connect the PW2 handle on the extension. For TR8 and SC160 If no movement = clearance is OK If movement = adjust the clearance The setting clearance should be IMPERATIVELY with an accessory mounted and locked on the handle. Applies to all accessories.
Read and follow these instructions before using the tool, and keep these safety instructions! When not in operation, the POWERCOUP PW2 handle and its accessories must be disconnected and stored in their case. PW2 POWERCOUP handle must always be disconnected from all power sources to the following: - Servicing.
WARRANTY CONDITIONS The POWERCOUP PW2 handle is covered under warranty for a period of two years against all manufacturing faults and defects. This warranty corresponds to recommended use of the tool and excludes: - Damage due to poor maintenance or a lack of maintenance,...
This tool is compliant with the safety regulations in force. All repairs must be carried out by an authorized service provider (ASP) or by INFACO and exclusively using original parts. Parts which are not original may seriously risk the safety of the user.
REPAIR Problem Causes Solutions No power Machine Reconnect to power supply. Error D01 Recharge the battery. Battery drained Error D02 Restart by pulling the trigger once. If the problem Load too high Mechanical seizing persists, contact your dealer. Tool does not start With Chain saw, check that the chain Error D14 Safety brake actived...
DEALER SECTION Section to be kept by the dealer Serial N°: ............................Surname : ............................First Name : ............................ Company name: ..........................Full address: ..........................................................Town/city: ............................Postcode: ............Telephone : ........... Client’Signature Purchase date: ../../..Customer owner of ELECTROCOUP pruning shears: If yes N°...
Page 22
DEALER TO BE KEPT BY THE DEALER FOR THE INFACO CUSTOMER FILE...
EQUIPMENT MANUFACTURED IN FRANCE Manufacturer: : INFACO S.A.S. - 81140 CAHUZAC-SUR-VÈRE (FRANCE) Type : POWERCOUP PW2 Weight of handle: Modèle PW2 1483g Max. power: 1100 W Battery voltage : 48 Volts This information is being given for informational purposes only. They are under no circumstances contractual, and are subject to modification for reasons of improvement, without prior notice.
2005/88/EC (order of 22 may 2006). - La personne autorisée à constituer le dossier technique au sein d’INFACO est M.ALVAREZ Grégory. The person authorized to compile the technical file within the company INFACO is Mr. Gregory ALVAREZ. Fait à...