Led Indications - infaco Electrocoup F3015 Original Instructions Manual

LED INDICATIONS

Green LED on (not flashing)
Orange LED on (not flashing) Excessive workload
Red LED on (not flashing)
Orange LED flashing
slowly
Red LED flashing slowly
Red LED flashing quickly
+ charge indicator off
Red LED
flashing quickly
Indication (the pruning shears are operational)
The device is running normally.
Sharpen your blade.
If the problem persists, this may mean that the tool is not suitable for
the work being carried out. Contact your dealer to obtain personalised
advice.
DSES system fault
Check the DSES glove connection and the cable condition.
If the problem persists, please contact your dealer.
Safety (Temporary pruning shear shut down)
5 consecutive blocking cuts
After a 5 second pause, the pruning shears automatically return to
normal operation.
The temperature of the pruning shears is high
Leave your pruning shears turned on, the pruning shears automatically
switch to normal mode as soon as the device is ready to use again.
Battery flat (the pruning shears stop working)
Battery flat
The red flashing power LED and the charge indicator off mean that
the battery is flat.
The battery must be recharged when in this state (see page 10).
Fault (The pruning shears stop)
Fault on the pruning shears
If the pruning shears show a fault, turn them off and back on again.
If the problem persists, please contact your dealer.
15