Lubrication; Blade Tightening - infaco Electrocoup F3015 Original Instructions Manual

Lubrication

For all these operations you must disconnect the pruning shears.
Lubricate at least twice per day (early morning and early afternoon).
For correct lubrication the pruning shear blade must be unlocked. To do this:
1. Use the tool to unlock the bolt and the nut.
2. Place the spray can nozzle in the lubricating cap channel. Hold the spray can upright and then lubricate.
3. Once lubrication is complete, adjust the tightening of the nut until the tool clicks.
4. Lock the bolt and carry out the blade tightness check procedure.

Blade tightening

For all these operations you must disconnect the pruning shears.
Check the blade tightening every morning.
A well tightened blade should not move from left to right.
To adjust the tightness:
1. Use the tool to unlock the bolt.
You do not need to remove the bolt.
Note: It is possible to have a slight movement in the direction of blade closure. This movement is normal and may
be caused by the gap between the rack and pinion teeth.
CLICK !
If the blade is correctly tightened you should be able to
close the pruning shears manually (without forcing).
2. Use the special tool provided and
adjust the nut tension until the tool clicks.
CLICK !
3. Lock the bolt and then check the
tightness using the above procedure.
17