Charger safety
Temperature fault on channel 1:
Flashing red LED
1. Remove the battery from channel 1 and wait a few
minutes for the battery to cool down.
2. Place the battery on the charger. If the problem persists,
please contact your approved INFACO dealer.
Temperature fault on channel 2:
Flashing red LED
1. Remove the battery from channel 2 and wait a few
minutes for the battery to cool down.
2. Place the battery on the charger. If the problem persists,
please contact your approved INFACO dealer.
Defective battery on channel 1:
Red LED on (not flashing)
1. Remove the battery from channel 1 and connect to
channel 2.
2. If the problem persists, remove the defective battery from
the charger and contact your approved INFACO dealer.
Defective battery on channel 2:
Red LED on (not flashing)
1. Remove the battery from channel 2 and connect it to
channel 1.
2. If the problem persists, remove the defective battery from
the charger and contact your approved INFACO dealer.
Please remember that the INFACO Lithium charger (Ref.: 841C2/842C2) is for exclusive use with
the F3015 Lithium batteries. It is not suitable for use with NiMH (Metal hydride) batteries.
Channel 1
Channel 2
13