First Use; Battery; Carrying The Equipment - infaco Electrocoup F3015 Original Instructions Manual

Electric pruning shears
Hide thumbs Also See for Electrocoup F3015:
Table of Contents

Advertisement

first use

The first time you use the equipment, we strongly recommend you to ask the advice of your dealer, who
is qualified to give you all the advice you need for correct use and optimum performance.
It is essential to read these instructions carefully before using the device.

Battery

Before using the equipment for the first time and/or putting the battery to sleep mode, fully charge
the battery (see charging procedure on page 10).
The F3015 Lithium battery MUST be recharged using the INFACO Lithium charger
(Ref.: 841C1/841C2).
It is prohibited to use a different charger as this may lead to a serious electrical accident.

Carrying the Equipment

1. Remove the battery, the battery-holder belt, the suspenders, the holster and the power cord
from the case.
2. Fit the battery onto the battery-holder belt. To do this, slip straps through the battery tabs.
Place the holster on the left or right strap on the battery-holder belt.
3. Slip the power cord through the left or right eye-hole provided in the battery-holder belt.
4. Fix the battery-holder belt to your waist, the battery must be located in the lumbar region.
When using suspenders, fix them to the battery-holder belt and adjust them to your size by pulling
on the straps.
In wet weather, it is imperative to carry the battery under waterproof clothing to keep the
battery unit protected from the rain.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents