Page 2
Reference Description Universal handle for the range POWERCOUP PW2. THD600 Double hedge trimmer, length of the cutting bar 600 mm (23,5’’). THD700 Single hedge trimmer, length of the cutting bar 700 mm (27,5’’). THS700 Double hedge trimmer, length of the cutting bar 700 mm (27,5’’).
Follow the specific instructions for waste elimination in your country. Electrical appliances should not be thrown in the garbage. The device, accessories and packaging should be recycled. Ask your specialist INFACO retailer for the latest information on eco-compatible waste elimination.
USER’S MANUAL INSTALLATION AND POWER CONNECTION Only use INFACO brand batteries with a supply voltage 48 volts. It is imperative to read the operating instructions for the tools and accessories before handling or connecting the tool. If it is raining, the battery vest must be worn underneath waterproof clothing so that the battery unit and control box remain dry.
Page 8
(x3) 1 Start : 2 short pulls of the trigger = ON Standby output : 2 short pulls of the trigger = ON Normal operation : 1 long pull of the trigger = ON Releasing the trigger = OFF SETTING OF ROTATION SPEED 10 speed increments available between 320 and 1900 r/min Start the machine To enter the set-up mode, do a long pull...
SAFETY PRECAUTIONS For transportation, storage, maintenance, tool maintenance or any other operation outside of using the tool, you must unplug the tool.
CARE AND MAINTENANCE All maintenance operations or maintenance must be performed after disconnecting the tool from all power sources. Maintenance of the tool depends on frequency of use. Occasional use, space out intervals. Intensive use, more frequent intervals. Visual inception Complete tool Cleaning Have check by dealer...
CHANGING THE ROTOR For transportation, storage, maintenance, tool maintenance or any other operation outside of using the tool, you must unplug the tool. 1- Using an open-ended spanner (15), block the transmission shaft of rotor 2- Release rotor turning anticlockwise by hand. If the rotor cannot be released by hand, use a pair of pliers.
Read and follow these instructions before using the tool, and keep these safety instructions ! When not in operation, the POWERCOUP PW2 handle and its accessories must be disconnected and stored in their case.
WARRANTY CONDITIONS The POWERCOUP PW2 handle is covered under warranty for a period of two years against all manufacturing faults and defects. This warranty corresponds to recommended use of the tool and excludes : - Damage due to poor maintenance or a lack of maintenance,...
This tool is compliant with the safety regulations in force. All repairs must be carried out by an authorized service provider (ASP) or by INFACO and exclusively using original parts. Parts which are not original may seriously risk the safety of the user.
REPAIR Problem Cause Solution Bad brush clamp Contact your dealer Abnormal heavy vibrations Faulty Tool Detection Contact your dealer Flyweight breakage Wear Change the broken flyweight Noise in the pole Deteriorated pole guide Contact your dealer Battery drained Recharge the battery No power Machine Reconnect to power supply.
RETAILER SECTION The retailer to keep this section Month / year of manufacture : ........Model: EP1700 Last name : ............................First name : ............................. Company name : ..........................Street address : ........................................................City : ..............................Zip code : ..........Phone : ...........
Page 18
RETAILER TO BE KEPT BY THE RETAILER FOR INFACO CUSTOMER FILE...
EQUIPMENT MANUFACTURED IN FRANCE Manufacturer : INFACO S.A.S. - 81140 CAHUZAC-SUR-VÈRE (FRANCE) Type : DESUCKERING TOOL EP1700 Weight : Model EP1700 3000g Max. power : 220 W Battery voltage : 48 Volts This information is being given for informational purposes only. It is under no circumstances contractual, and is subject to modification for reasons of improvement, without prior notice.
Page 20
2005/88/EC (order of 22 may 2006). - La personne autorisée à constituer le dossier technique au sein d’INFACO est M.ALVAREZ Grégory. The person authorized to compile the technical file within the company INFACO is Mr. Gregory ALVAREZ. POWERCOUP PW2 - EP1700 Niveau de pression acoustique pondéré...