infaco BC3015 Instructions

First use
1. Connect the box to the battery
2. Launch the
the home page.
3. Connect and power on the pruning shears.
Prerequisite:
Android 5.1 version minimum
IOS version 13.0 minimum
To use the app and detect the box, activate
geolocation and Bluetooth
For more information, use the following link: https://
my.infaco.com/help or scan the QR code
Items to check:
• Android:
- Activation of the required permissions (if not activated,
an error message is displayed that redirects to the phone
settings);
- In "Battery Optimization" mode, the INFACO
not need to be optimized. This blocks geolocation when
the smartphone is on standby;
- Activation of mobile data for proper pruning tracking
operation.
• IOS: activate all the authorizations required for the
app to run.
Protection of the environment
Observe all country-specific waste disposal rules and
regulations.
> Power tools must not be disposed of with
household refuse.
> The device, accessories and packaging must be
taken to a recycling center.
> Ask the approved INFACO dealer for up-
to-date information on the eco-compatible
elimination of waste.
app and select the box from
F3015
F3020
on the phone.
®
app does
®
Precautions for use and safety
- Before starting the working day, make sure the battery
is fully charged (3 LEDs lit on the pruning shears).
- Always disconnect the product from the power cord
when handling for other purposes than pruning.
- Do not leave the product and/or the battery on the
ground, and do not expose them to the elements.
- Make sure the battery's protective plastic casing is not
cracked and does not seem to have suffered impacts
or other aggressions.
- When working, it is normal for the battery temperature
to rise. Recommended operating temperature: -5 to
35°C / 23 to 95°F.
- In wet weather, it is imperative to carry the battery and
the product under waterproof clothing to keep them
protected from the rain.
- After using the tool in the rain or in a damp
environment, it is strongly recommended to store the
(disconnected) device outside its case in a heated and
ventilated place.
- Always keep the cord away from the cutting zone.
Declaration of conformity (EC)
INFACO S.A.S. declares that the new equipment
designated below:
Connected box
Brand name: INFACO
Model: BC3015 / BC3020
Serial number:
Year of manufacture: 20
Complies with the provisions of the following directives:
• "Safety Requirements" (IEC 62368-1-2014)
• "Machinery" (directive 2006/42/EEC)
• "Electromagnetic compatibility" (directive 2004/108/
EEC) and the national legislation enacting them.
• The person authorized to compile the technical file at
INFACO is Mr. Gregory ALVAREZ.
Signed at: CAHUZAC SUR VÈRE
On: 01/01/2023
M. DELMAS Daniel INFACO Managing Director
INFACO undertakes to provide national authorities with
all relevant information concerning the machine.