MAIN ShIFT lEvER
(1) main shift lever
Four speeds can be selected by
moving this main shift lever in the
h
shaped path. it is possible to
「
」
shift this lever from the 1st to 4th
gears even when the tractor is mov-
ing by disengaging the clutch as
these gears are synchromeshed.
there are 4 speeds for the main shift
lever, 3 speeds for the range shift
lever and 2 directions for the shuttle
shift lever. therefore, there are 12
forward driving speeds and 12 re-
verse driving speeds in total.
M55-유럽판-04.indd 21
RANGE GEAR ShIFT lEvER
M55O4E2A
(1) range gear shift lever
(l) low speed
(m) middle speed
3 speeds can be selected by operat-
ing the range gear shift lever in the
「I」shaped pattern. Make sure to
shift this lever after the tractor is
completely stopped by depress-
ing the clutch pedal. if the lever is
not moved freely or makes abnormal
noise, put the lever in the neutral po-
sition, depress the clutch pedal, and
then try to shift the lever.
description oF operating system
•
Make sure to shift the range
gear shift lever with the clutch
pedal depressed and the trac-
tor stationary.
•
Never put the range gear shift
lever in the 3rd gear position
during driving backward as it
is dangerous to drive at a high
speed.
M55O4E3A
•
The tractor is not braked by
depressing the brake pedal
(n) neutral
(h) high speed
without depressing the clutch
pedal at a low speed as rota-
tional force of the axle has a
major effect at a low speed.
T h e r e f o r e , d i s e n g a g e t h e
clutch before depressing the
brake pedal to stop the tractor.
•
To shift the lever, depress the
clutch pedal fully.
4
21
-
CAuTION
4
2011-08-11 오전 11:58:26