Pto Shift Lever; Pto Shift Lever; Cutting Height Adjustment Lever - Kioti CS2610 Manual

4
22 Cs2610
-

PTO SHIFT lEvER

(1) pTO shift Lever

This lever is to shift the pTO speed
as follows:
rear position (A): Connecting only

to rear pTO
Middle position (b): Connecting

rear and middle pTO
Front position (C): Connecting only

to middle pTO
M46-EU,AU-04.indd 22

CuTTING HEIGHT ADJuSTMENT lEvER

M46O434A
(1) Cutting height Adjustment Lever
Cutting height is controlled by the
height adjustment control lever. The
cutting height can be set to seven dif-
ferent heights.
IMPORTANT
Deck must be in the "full up"

position before cutting height
can be changed. Do Not at-
tempt to change cutting height
with deck in any other position
than "full up".
when gauge wheels are prop-

erly adjusted, gauge wheels
will not contact the ground!
Gauge wheels are not meant
to continuously contact the
ground, the wheels act as anti
M46O452A
scalp rollers on the four cor-
ners of the deck.
2012-01-19 오후 1:48:47