Maintaining Your Machine; Cleaning The Exposure Glass - Ricoh Aficio IS 2425 Operating & Troubleshooting Instructions

Maintaining Your Machine

If the exposure glass, exposure glass cover, or ADF belt is dirty, copy clarity may
be reduced. Clean these parts if they are dirty.
Important
❒ Do not use chemical cleaners or organic solvents, such as thinner or benzene.
If such substances get inside the machine or melt plastic parts, a failure might
occur.
❒ Do not clean parts other than those explicitly specified in this manual. Other
parts should only be cleaned by your service representative.
❖ How to maintain
Wipe the machine with a soft, damp cloth, and then wipe it with a dry cloth
to remove the water.

Cleaning the Exposure Glass

This section describes how to clean the exposure glass and the scanning glass.
Clean 1 and 2.
Maintaining Your Machine
8
101