Setting Originals - Ricoh Aficio 470W Operating Instructions Manual

Setting Originals

Note
Place the original after correction
fluid and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.
Dust and residue from originals
drawn with a pencil can mark the
exposure glass and cause marks to
be copied. We recommend using
the carrier sheet for this type of
original.
If the rear edge of the original is
badly curled, smooth out the curl
with both hands before scanning
the original. If the original is insert-
ed as it is, it may be damaged.
When copying curled originals,
use the copy output (front) auxilia-
ry tray.
Do not use force to push the side
fence of the original guides.
Reference
For details about precautions with
originals, see P.13 "Originals"
A
Adjust the original guides to the
size of the paper width.
Note
Make sure that the original
guides are not too tight.
B
Carefully place the original be-
tween the original guides, using
both hands, with the side to cop-
ied face up.
Important
Do not release your hands until
that the original is pulled into
the machine.
Once the originals start to feed
into the machine, do not push or
pull them. This may damage
your originals,
If the originals are fed at a slant
or become jammed, press the
{Scanner Stop} key.
Do not operate the document
roller while originals are being
ZEDH190E
fed through the machine. This
may damage your originals,
Setting Originals
2
ZEDH180E
ZEDH150E
31