Auto Reset; Auto Off - Ricoh Aficio 470W Operating Instructions Manual

Copying

Auto Reset

The machine returns to its initial con-
dition automatically after your job is
finished, after a certain period of
time. This function is called "Auto Re-
set".
2
Note
The default settings that after Auto
Reset, or after the {Clear Modes/En-
ergy Saver} key has been pressed, is
as follows.
Auto Image Density On
Combined Auto and
Manual Density
Default image den-
sity
Synchro Cut
Selected paper roll Paper Roll 1
Full size
*1
: Density Priority setting can be
changed
*2
: Paper Roll Priority setting can be
changed
You can store the settings you
want to use as the default settings
for the Initial Screen in Program
No. 20. See P.126 "Initial Mode Set",
P.53 "Program"
You can change the Auto Reset
time. See P.126 "Copier Reset Timer"
In some cases Auto Reset will not
reset the settings.
• If a paper roll tray is open
• If there is an original or paper
jam
• If a cover is open
• If copying has been interrupted
• During copying (if only one
original has been inserted when
using Image Overlay)
30
*1
On
Centre
On
*2
On
• During copying (if there is no
paper in the bypass tray after a
manual copy original has been
scanned)
• When the "PLEASE WAIT" is
displayed (such as while the
machine is warming up)

Auto Off

The machine turns itself off automat-
ically after your job is finished, after a
certain period of time. This function is
called "Auto Off".
Note
You can change the Auto Off time.
For Auto Off time setting, see "Au-
to Off Timer" of the "System Set-
tings" manual.
In some cases the machine will not
automatically turn itself off.
• If there is an original or paper
jam
• If a cover is open
• If copying has been interrupted
• During copying (if only one
original has been inserted when
using Image Overlay)
• During copying (if there is no
paper in the bypass tray after a
manual copy original has been
scanned)
• When the "PLEASE WAIT" is
displayed (such as while the
machine is warming up)