Preset Reduce/Enlarge - Ricoh Aficio 470W Operating Instructions Manual

Copying

Preset Reduce/Enlarge

You can select a preset ratio for copy-
ing. You can store up to three enlarge-
ment or reduction ratios of your own.
2
Preparation
You can select one of 8 present ra-
tios (4 enlargement ratios, 4 reduc-
tion ratios).
Metric version
Enlargement Ratios: 141%, 200%,
283%, 400%
Reduction Ratios: 25%, 35%, 50%, 71%
Inch version
Engi-
neering
Architec-
ture
You can store up to three ratios of
your own for ratios you frequently
use, but which are not in the preset
ratios. The ratios can be set in 0.1%
steps (0.2% over 200%.). See P.131
"User Reproduction Ratio"
58
ZEDG050E
Enlargement ratios:
129%, 200%, 259%, 400%
Reduction Ratios: 25%,
32%, 50%, 65%
Enlargement ratios:
133%, 200%, 267%, 400%
Reduction Ratios: 25%,
33%, 50%, 67%
You can specify the enlarge/re-
duce ratio to use when the power
is turned on, after Auto Reset, or
the {Clear Modes/Energy Saver} key
has been pressed. See P.131 "Preset
Reduce/Enlarge Priority"
Note
Preset ratios are set by combining
the original size and paper size.
You can select a ratio regardless of
the size of an original, copy paper
or roll paper. With some ratios,
parts of the image might not be
copied or margins will appear on
copies.
Reference
For details on the relation between
the original and paper sizes for
preset ratio, see the ratio table. See
P.160 "Magnification Ratio Chart"
A
Press the [Reduce/Enlarge] key.
B
Select a ratio.
C
Press the [OK] key.