Switching The Original Exit - Ricoh Aficio 470W Operating Instructions Manual

Copying
Copy out-
put
2
Important
The paper capacity indicated assumes the use of standard copier paper, and
should only be used as a guide. If the paper exceeds the upper limit, the cop-
ies may become folded or cause paper jams.

Switching the Original Exit

Select the appropriate output from [Upper], [Rear (Straight)], or [Rear (Document
Roller)], for the type of original you are using.
Upper
This is the basic output exit for originals. The originals are ejected to [Original
Output (Upper)].
Rear (Straight)
When copying thick, or hard, originals, select [Original Output (Rear (Straight))].
The originals are ejected to [Original Output (Rear (Straight))].
Rear (Document Roller)
If you select [Rear (Document Roller)] when copying long length originals, the
original is ejected to document roller. See P.24 "Original output (Rear (Docu-
ment Roller))".
Important
Use the carrier sheet with [Original Output (Rear (Straight))]. If you use [Original
Output Rear (Upper)], your originals may be damaged.
22
Copy Out- A1 (D)Lor
put (Front) less:
• Same size copy paper
Copy Out- A1 (D)K,
put (Rear) A0 (E):
• Same size copy paper
• When using A0 size copy paper, attach the copy out-
put (rear) auxiliary guide. See P.26 "Using rear output
for A0 (E) Paper"
99 sheets (plain paper)
10 sheets (translucent paper (vellum))
1 sheet (film)
10 sheets (Plain paper)
1 sheet (Translucent paper (vellum))
1 sheet (film)