Ricoh Aficio 470W Operating Instructions Manual page 124

Troubleshooting
Machine's Condition
Original orientation: K
Original orientation: L
Check paper size.
3
Rotate Sort mode is not avail-
able with the current settings.
Maximum copy quantity:
Misfed original is located in
this area. Open the indicated
cover and remove misfed
original.
Misfed paper is located in
these areas. Open the indicat-
ed areas and remove misfed
paper.
104
Problem/Cause
The machine is set for K orig-
inals.
The machine is set for L orig-
inals.
The paper size is different to
the size of the original.
The scanned original is too big
to rotate.
A paper size suitable for ro-
tate sort has not been selected.
The number of copies exceeds
the maximum copy quantity.
The original has jammed
(original misfeed).
When you press the {Scanner
Stop} key while original is be-
ing fed through the machine.
The copy paper has jammed.
Action
Change the orientation (direc-
tion) of the original.
You can specify whether K or
L originals have priority. See
"Basic Setting 1/3" in the Sys-
tem Settings manual.
• Set the suitable paper, or
change paper roll select-
ing.
• Reset the function settings,
and then try again.
You cannot use rotate sort
with A0 (E) originals.
Set paper with the following
dimensions; A2 594 420mm,
A3 420 297mm, A4 297
210mm.
Inch version (Engineer-
ing)
1
• 11" 8 / "
2
• 17" 11"
• 22" 17"
Inch version (Architec-
ture)
• 12" 9"
• 18" 12"
• 24" 18"
You can change the maximum
copy quantity that you can
make at a time. See P.128
"Maximum Copy Quantity"
Follow the on-screen instruc-
tions to remove the jammed
original. See P.117 " x Clearing
Misfeeds"
Follow the on-screen instruc-
tions to remove the jammed
paper. See P.117 " x Clearing
Misfeeds"