Auto Reduce/Enlarge - Ricoh Aficio 470W Operating Instructions Manual

Limitation
If you select the tray paper type
setting to [Translucent] or [Film] (ex-
cept for [Plain] or [Recycled paper]),
the auto paper select function will
not be used. For tray paper type
setting, see "Tray Paper Type" in
the System Settings manual.
If the type of paper changes when
you select the paper source, it may
take longer for copying to start.
When using a 30" width original,
set the original size auto detect set-
ting to off. See P.128 "Original Size
Auto Detect"
Note
If you press the {Clear Modes/Energy
Saver} key immediately after turn-
ing the power on, you can specify
the paper roll to be used as the de-
fault setting for Auto Reset. The
default setting is paper roll 1. See
P.127 "Paper Roll Priority"
Reference
P.46 "Copying from the Bypass
Tray"
Auto paper select
A
Make sure that the [Auto Paper Se-
lect] key is selected.
Note
When Auto Paper Select is se-
lected, it may take slightly long-
er for copies to make since the
machine selects the paper after
scanning the original.
Manual paper select
A
Select the paper roll 1, paper roll
2, paper roll 3 (option), or bypass
tray.

Auto Reduce/Enlarge

The machine can choose an appropri-
ate magnification based on the paper
and original sizes you select.
Basic Functions
2
ZEDG020E
43