Table of Contents
Advertisement
Troubleshooting
Problem
The background for translu-
cent paper (vellum) is dirty.
Streaks, scratches, or wrinkles
appear in areas of solid black
color.
3
Shadows appear on the cop-
ies.
The copies are blurred.
108
Cause
More than 50 copies are being
made of originals longer than
1189mm (46.9") with solid
block of color (2mm 900mm
(0.08"
35.4") or larger.)
The paper has been changed
from plain paper to translu-
cent paper (vellum), or from
translucent paper (vellum) to
plain paper.
The original is a two sided
original, or image density set-
ting is too dark.
Continuous copies have been
made on small sized paper.
Action
Adjust the fuser setting to
match the paper type. See
"Fusing Adjustment: Paper
Tray" in the System Settings
manual.
After switching from plain pa-
per
to translucent paper
(vellum) wait one minute. Af-
ter switching from translucent
paper (vellum)
to plain pa-
per wait two minutes before
making copies.
Adjust the image density set-
ting. See P.41 "Adjusting Copy
Image Density"
Wait about two minutes, and
then try copying again.
- Quick Links:
- Guide to Components
Hide quick links:
Advertisement
Table of Contents
