Zoom - Ricoh Aficio 470W Operating Instructions Manual

Zoom

You can change the magnification in
0.1% (or 1%) steps.
Preparation
You can set the ratio in the follow-
ing ways.
• Using the number keys
• Selecting a ratio close to the one
you want to set from Preset Re-
duce/Enlarge, and then press
the [-1%][+1%] or [-0.1][+0.1] keys
to adjust the ratio.
Limitation
You cannot use Zoom if Auto Pa-
per Select or User Auto Reduce/
Enlarge are selected.
Note
You can set the magnification ratio
from 25.0 to 400.0%.
To set the magnification ratio on
screen, use the [-1%] or [+1%] key.
To specify a decimal value, use the
[-0.1] or [+0.1] key.
For ratios 25.0 – 200.0% the steps
are 0.1%, for ratios 200.0 – 400.0%
the steps are 0.2%.
You can select a ratio regardless of
the size of an original, copy paper
or roll paper. With some ratios,
parts of the image might not be
copied or margins will appear on
copies.
A
Press the [Reduce/Enlarge] key.
When using the Number keys
ZEDG060E
A Press the [Input Ratio] key.
B Enter the desired ratio with the
number keys.
Note
Use the {·} key to enter a dec-
imal point.
To change the value, press the
{Clear/Stop} key, and then enter
the new value.
Zoom
2
ZEDS091E
59