Date Stamp - Ricoh Aficio 470W Operating Instructions Manual

Copying

Date Stamp

The optional stamp board and HDD are required to use this function.
2
Preparation
Specify the print position (Top
left/Top centre/Top right/Bottom
left/Bottom centre/Bottom right)
and print direction (Horizontal/
Vertical).
Place your originals, and then
specify the date stamp position
and direction.
Limitation
You cannot use the bypass tray.
You can print on paper sizes up to
A0.
94
Note
You can change the date format of
the date stamp. See P.136 "Date
2002.2.12
Stamp Format Priority"
You can also set and change the
other date stamp conditions. See
P.136 "Date Stamp Format Priority"
You can use the date stamp with
(up to two) other user stamps.
ZEDG250E
The date set in "Time Settings" is
used for the date stamp. See the
System Settings manual.
A
Press the [Stamp] key.
B
Press the [Date Stamp] key.