Omron V680S-HMD63-ETN User Manual page 31

RF Tag
 V680-D1KP54T
 General Specifications
Item Model
Compliance standards ISO/IEC 18000-3 (15693)
Memory capacity 1,000 bytes (user area)
Memory type EEPROM
Data retention 10 years after writing (85°C or less), 0.5 years after writing (85 to 125°C)
Total data retention at high temperatures exceeding 125°C is 10 hours
Write endurance 100,000 writes for each block (25°C)
Ambient operating -25 to 85°C (with no icing)
temperature
Ambient operating 35% to 95%
humidity
Ambient storage -40 to 125°C (with no icing)
temperature
Ambient storage humidity 35% to 95%
Degree of protection IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1)
Vibration resistance No abnormality after application of 10 to 2,000 Hz, 1.5-mm double amplitude,
acceleration: 150 m/s
Shock resistance No abnormality after application of 500 m/s
20 dia. × 2.7 mm
Dimensions
Materials PPS resin
Weight Approx. 2 g
Metal countermeasures None
Note 1. After storing RF Tags at high temperatures, rewrite the data even if changes are not required. High temperatures are
those between 125 and 180°C.
2. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
 Dimensions
1.1 2.7±0.1
16 dia.±0.1
20 dia.±0.1
The V680-D1KP54T RF Tag can be placed in the Attachment in either direction. The direction does not affect operation.
The ID code is written in the memory of the RF Tag and may be affected by data retention characteristics at high
temperatures. Take suitable precautions when using the READ ID query for RF Tags operating at high temperatures.
You cannot use FIFO Trigger communications.
V680-D1KP54T
2 , 10 sweeps each in X, Y, and Z directions for 15 minutes each
(Unit: mm)
Case material PPS resin
Product Overview
See Note 1.
See Note 2.
2 , 3 times each in X, Y, and Z directions (Total: 18 times)
Section 1
RFID System
29
User's Manual
(Modbus TCP)