Section 7
Host Communications Specifications
Checking Reader/Writer Information
MEASURE NOISE
GET DEVICE INFORMATION
GET FIRMWARE VERSION
GET MAC ADDRESS
GET Reader/Writer OPERATING
STATUS
GET OPERATING TIME
GET RECENT ERROR QUERY
INFORMATION
GET COMMUNICATIONS ERROR
LOG
GET SYSTEM ERROR LOG
GET RESTORE INFORMATION
Controlling Reader/Writer Operation
STOP
RESET
RFID System Maintenance
SET COMMUNICATION
DIAGNOSTIC
GET COMMUNICATION
DIAGNOSTIC SETTING
Multi-Reader/Writer Functions
SET MULTI-READER/WRITER
SETTINGS
GET MULTI-READER/WRITER
SETTINGS
GET MULTI-READER/WRITER
STATUS
RFID System
156
User's Manual
(Modbus TCP)
Name
Measures the noise level around the Reader/Writer.
Reads the model number from the Reader/Writer.
Reads the firmware version from the Reader/Writer.
Reads the MAC address from the Reader/Writer.
Reads the operating status from the Reader/Writer.
Reads the operating time from when the power supply to the Reader/Writer
was turned ON.
Reads the recent error information from the Reader/Writer.
Reads the log of communications errors that have occurred in the Reader/
Writer.
Reads the log of system errors (fatal errors) that have occurred in the Reader/
Writer.
This query reads the restore information from the Reader/Writer.
Name
Stops Reader/Writer operation.
Resets the Reader/Writer.
Name
Sets communication diagnostic.
Gets the communication diagnostic setting.
Name
Enables and disables the Multi-Reader/Writer functions. When the Multi-
Reader/Writer functions are enabled, the number of Slave Reader/Writers and
their IP addresses are set.
Reads the setting of the Multi-Reader/Writer functions.
Reads the Master Reader/Writer and Slave Reader/Writer status when the
Multi-Reader/Writer functions are being used.
Description
Description
Description
Description
Page
p.182
p.183
p.184
p.185
p.186
p.187
p.188
p.190
p.192
p.193
Page
p.194
p.197
Page
p.194
p.197
Page
p.202
p.204
p.205