Test Points - Daughter Card - NXP Semiconductors S32R274 EVB User Manual

Similarly CAN2 signals can be routed to either the on-board CAN-FD phy U16 via J43 and J44, or to
the motherboard Flexray physical interface via J46 and J45.

4.10 Test Points - Daughter Card

Daughter card test points are listed and detailed in Table 11.
Signal
VREG_SWP
3V3_HV_REG
VREG_I-SENSE
Figure 21. CAN FD Physical Interfaces
Table 11. Test points – daughter card
TP name Shape
TP1 Test Loop
TP2 Test Loop
TP3 Test Loop
S32R274 EVB User Guide
Description
Driver signal for
external switching
transistor
3V3 Supply to external
transistor
Current sense analog
input
24