Table of Contents
Advertisement
Figure 1.
Figure 1. Modular concept – Mother board and MCU daughter card
Please consult the website at
availability of MCU daughter cards.
For details on your specific daughter card, please consult the instructions
included with the daughter card.
The EVB is designed to use the motherboard and the daughter card in conjunction. However, it is
possible to use the daughter cards standalone.
1.3
Daughter Card Availability
A number of compatible daughter cards are available for the motherboard across a number of devices.
Table 2 gives an overview of daughter cards that can be used with MPC57xx motherboard and
associated devices, package sizes and part numbers.
Daughter card number
S32R274RRUEVB
All daughter cards will be similar in design and concept. For details on the daughter cards please refer to
chapter 3.7.
2
EVB Features
The EVB system consists of a motherboard and a daughter card, both with distinct features.
The mother board provides the following key features:
• Support provided for different MCUs by utilising MCU daughter cards
• Single 12V external power supply input with four on-board regulators providing all of the
necessary EVB and MCU voltages; Power supplied to the EVB via a 2.1mm barrel style power
jack or a 2-way level connector; 12V operation allows in-car use if desired
• Master power switch and regulator status LEDs
• Two 240-way high-density daughter card expansion connectors allowing connection of the MCU
daughter card or a custom board for additional application specific circuitry
www.nxp.com
or speak to your NXP representative for more details on the
NOTE
Table 2. Daughter card overview
Device
S32R274
Package
Socket
257BGA
Yes
S32R274 EVB User Guide
Nexus
Yes
4
Advertisement
Table of Contents
