Bottom cover
NOTE:
The bottom cover spare part does not include the rubber foot. The rubber kit spare part number is
L15592-001.
Description
Bottom cover in Dark Ash Silver
IMPORTANT:
and replacement
Before removing the bottom cover, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
Remove the bottom cover:
1.
Remove the rubber foot covering four of the screws that secure the bottom cover to the computer (1).
2.
Remove the four Phillips PM2.0×10.0 screws (2).
3.
Remove the two Phillips PM2.0×3.5 screws (3).
Make special note of each screw and screw lock size and location during removal
Spare part number
L15591-001
Component replacement procedures
29