Table of Contents
Advertisement
Bottom cover
Table 5-1
Spare part description and number
Description
Bottom cover
Before removing the bottom cover, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in "Battery Safe mode"
Remove the bottom cover:
1.
Remove the two Phillips M2.0×5.0 screws (1) that secure the bottom cover to the computer.
2.
Loosen the five captive Phillips screws (2).
3.
Starting under the display, use a non-conductive, non-marking tool to pry the cover up (1), lift the rear
of the cover to disengage it from the computer (2), and then remove the bottom cover from the
computer (3).
Reverse these procedures to install the bottom cover.
(Preparation for disassembly on page
(Battery Safe mode on page
Spare part number
L44515-001
30).
30).
Component replacement procedures
31
Advertisement
Table of Contents
