Touchpad Button Board; Prepare The Computer For Disassembly (Preparation For Disassembly; Remove The Bottom Cover (See Bottom Cover - HP ZBook 14u G6 Maintenance And Service Manual

Touchpad button board

Table 6-9 Touchpad button board descriptions and part numbers
Description
Touchpad button board
Before removing the touchpad button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad button board:
1. Disconnect the touchpad button board cable from the ZIF connector on the touchpad (1).
2. Remove the four Phillips M2.0 × 3.0 screws (2) that secure the board to the computer, and then remove
the touchpad button board from the computer (3).
Reverse this procedure to install the touchpad button board.
58 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 46).
34).
34).
Spare part number
L17826-001