Table of Contents
Advertisement
Solid state drive
Description
2 TB PCIe NVMe TLC M.2 solid state drive
1 TB PCIe NVMe TLC M.2 solid state drive
512 GB PCIe NVMe TLC M.2 solid state drive
360 GB PCIe NVMe TLC M.2 solid state drive
256 GB PCIe NVMe TLC M.2 solid state drive
IMPORTANT:
and replacement
Before removing the solid state drive, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
a.
Battery (see
b.
Front speakers (see
c.
System board mylar (see
d.
USB daughter board cable (see
NOTE:
be removed (and can then be reused).
Remove the solid state drive:
1.
Remove the Phillips PM2.0×2.5 screw (1).
Make special note of each screw and screw lock size and location during removal
Bottom cover on page
Battery on page
Front speakers on page
Left fan on page
Removal of the USB daughter board is not required for this procedure. Only the cable must
29), and then remove the following components:
31).
32).
45).
USB daughter board on page
Spare part number
L16589-001
L16588-001
L16587-001
L16586-001
L16585-001
39).
Component replacement procedures
49
Hide quick links:
Advertisement
Table of Contents
