Memory Card Reader Board - HP Spectre x360 15 Maintenance And Service Manual

Memory card reader board

NOTE: The memory card reader board spare part kit does not include the memory card reader cable (spare
part number L15580-001).
Description
Memory card reader board
IMPORTANT:
and replacement
Before removing the memory card reader board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Front speakers (see
Remove the memory card reader board:
1. Release the memory card reader board cable from the ZIF connector on the system board (1).
2. Remove the Phillips PM2.0×2.5 screw (2).
3. Remove the memory card reader board from the computer (3).
Reverse this procedure to install the memory card reader board.
42 Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Bottom cover on page
Battery on page
Front speakers on page
29), and then remove the following components:
31).
32).
Spare part number
L15579-001