Touchpad Assembly - HP Spectre x360 15 Maintenance And Service Manual

TouchPad assembly

NOTE: The TouchPad assembly spare part kit does not include the TouchPad cable (spare part number
L15678-001).
Description
TouchPad assembly
IMPORTANT:
and replacement
Before removing the TouchPad assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Front speakers (see
c. Memory card reader board (see
Remove the TouchPad assembly:
1. Release the TouchPad cable from the ZIF connector on the system board (1).
2. Release the TouchPad cable from the ZIF connector on the TouchPad assembly (2).
3. Remove the TouchPad cable (3).
Make special note of each screw and screw lock size and location during removal
Bottom cover on page
Battery on page
Front speakers on page
29), and then remove the following components:
31).
32).
Memory card reader board on page
Spare part number
L15589-001
42).
Component replacement procedures 43