Volume Button Board - HP Spectre x360 15 Maintenance And Service Manual

Volume button board

NOTE: The volume button board spare part kit does not include the volume button board cable (spare part
number L15582-001).
Description
Volume button board
IMPORTANT:
and replacement
Before removing the volume button board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Front speakers (see
Remove the volume button board:
1. Release the volume button board cable from the zero insertion force (ZIF) connector on the system
board (1).
2. Remove the volume button board cable from the keyboard/top cover (2).
NOTE:
cover, it may be necessary to move the cable from side to side to detach it.
3. Remove the Phillips PM2.0×3.5 screw (3) that secures the board to the computer.
Make special note of each screw and screw lock size and location during removal
Bottom cover on page
Battery on page
Front speakers on page
Due to the adhesive located between the volume button board cable and the keyboard/top
29), and then remove the following components:
31).
32).
Spare part number
L15581-001
Component replacement procedures 33