928A Starter Kit - Arbiter Systems 928A User Manual

Caution: CT Probe Use
Please note that the jaws of the CT probe must be
fully closed to operate properly. Some probes have a
locking device, which must be fully engaged before the
probe will operate correctly. When clamping any CT
probe around conductors, always inspect the two jaws
to make sure they are fully closed.
CT Characterization
While the 928A Starter kit includes a CT probe that
has been characterized for accuracy, Arbiter also pro-
vides a service for users to have their own CT charac-
terized for use with the 928A. Contact Arbiter Systems
for more information on this service.
For more information on CT characterization files
(called "Profiles"), see instructions under "CT Char-
acterization Files" on page 30.

928A Starter Kit

AP0011200 - +7 Vdc Power Supply
AP0009700 - Single-Phase Voltage Lead Set
AP0012300 - 100:1 Clamp-On CT 150 A 10 mV/A
BT0000201 - 1.5 Volt AA Alkaline Battery (4)
CA0026106 - 928A USB Cable A-B 6 ft.
CA0027200 - 928A CT Cable Voltage Output
PD0030900 - Operation Manual
HD0069800 - 928A Soft Carrying Case
CTCAL01 - CT Calibration (100 mA – 100 A)
AS0082900 - 928A Bail Assembly
4